← Using the Python Definition TypeUsing the Visual Basic Script Definition Type →

Using the PowerShell Definition Type

The Microsoft Windows PowerShell is a shell meant for interactive use that can also be used for non-interactive scripts. It comes as standard with Microsoft Server 2008 and later.

note

You must assign at least one process server to run PowerShell processes in order to use the definition type.

The PowerShell is very strong in interacting with .Net objects, as it can pass objects between different 'cmdlets' instead of strings, as in most shells.

32/64-bit

By default, the 32-bit versions of the interpreters are used on Windows platforms, this can be changed using the following:

  • JCS_INTERPRETER_PS1 - parameter used to override default, can be set to C:/Windows/Sysnative/WindowsPowershell/v1.0/powershell.exe for 64-bit; default when non-existent or empty and process server parameter LocalInterpreter_PS1 not set: C:/Windows/System32/WindowsPowershell/v1.0/powershell.exe
  • InterpreterWhitelist_PS1 - process server parameter that takes a regex expression matching all interpreters you want supported. Use *. to allow any or C:/Windows/.*/powershell.exe to allow any powershell.exe in a subfolder of C:/Windows. You can also explicitly set two separated by a comma without space (regex syntax): C:/Windows/Sysnative/WindowsPowershell/v1.0/powershell.exe,C:/Windows/System32/WindowsPowershell/v1.0/powershell.exe
  • LocalInterpreter_PS1 - process server parameter used to set default to 64-bit, can be set to C:/Windows/Sysnative/WindowsPowershell/v1.0/powershell.exe for 64-bit; affects all processes for the process server that do not have JCS_INTERPRETER_PS1 set, default or when not set: C:/Windows/System32/WindowsPowershell/v1.0/powershell.exe
  • LocalInterpreterBits - Set this key to 64 and all Windows platform agents will use 64-Bit interpreters.
note

Remember that on 64-bit Windows platforms the System32 directory contains 64-bit binaries and SYSWOW64 is the directory containing 32-bit binaries.

note

In Windows 64-bit, you have to explicitly call the 32-bit binaries to access C:\\Windows\\Sysnative; the path does not exist for 64-bit applications.

Execution Policy

The default execution policy of the PowerShell is Restricted, which does not allow the execution of scripts. As of v9.0.2 Redwood Server calls the powershell scripting engine in a mode that enables scripting for that session only, making it no longer necessary to set the execution policy beforehand.

Background and Foreground Processes

By default, commands are executed in the background; you will not see any dialog in the server. If you want to display a process on-screen, you use the {session} or {console} keywords in the Run As User field followed by the credential or username and password.

  • {session} - RDP, Windows Terminal Server, or console session
  • {console} - Console session, only; console sessions are displayed on the physical monitor screen attached to the server.
note

The specified user must be logged in to a console session (for {console}) or any type of the supported sessions (for {session}) or the process will reach status Error.

note

Sessions are always for a user account; it is not possible to run session/console Processes under NT Authority\LocalSystem.

Examples

Specifying a Run As User field with {session} and virtual user

{session}{virtual}:ops

Specifying a Run As User field with {console} and credential

{console}example@example.corp

Variables and Parameters

  • Parameters to the process definition are manipulated in the PS1 source simply as if they are variables, using the standard $VARIABLE syntax. You can also use get-variable -name <name> -scope global.
  • The PowerShell language has knowledge of data-types. The String and Number data-types are supported. DateTimeZone parameters are stored in DateTime variables. This means that you cannot transfer the time zone of a parameter to a PowerShell variable; it will be converted to the corresponding date-time in the local time zone of the Microsoft Windows system. Out parameters are converted to UTC (GMT).
  • Out parameters are supported by setting the parameter using the $VARIABLE = VALUE syntax or the Set-Variable, New-Variable cmdlets.
  • Array parameters are now supported in PowerShell, limited to unique elements, only.

Error Handling

If your script code exits with an error this is correctly reflected in the server, and output parameters are set as far as they were already set. Do note that the PS1 process modifies ErrorActionPreference, its default value in Redwood Server is "Stop". If you want your script to continue on error set it to "Continue" (default in PowerShell) in the beginning of your script:

$ErrorActionPreference = "Continue"

Apartment Models

Microsoft Windows has a concept of an "Apartment model". This is a remnant of (very) old Windows versions where it was usual that COM and OLE objects were not multi-threaded, and would not be usable from a multi-threaded application. To get around this Microsoft developed a set of shims that allow multi-threaded applications such as PowerShell to funnel all access to COM and OLE objects through a single thread. This is called the Single Thread Apartment model. Depending on which commandlets and COM/OLE objects you call you may need to have the PowerShell started either in Single Thread Apartment (STA) or Multi Thread Apartment (MTA) model.

Redwood Server starts the PowerShell in its default mode. For v1 and v2 of PowerShell this is MTA. For v3 it is STA. Note that Windows PowerShell ISE is always started in STA mode.

If you want to use an explicit model, specify the LocalInterpreter_PS1 process server parameter and set it to

powershell -sta

or

powershell -mta

Examples

Parameters

The following shows how to pass numeric (N1), string (S1) and date (D1) parameters to and from PS1 scripts:

$N1=$N1 + $N1
# Concatenate string
$S1="$S1 $S1"
[datetime]$DTEMP="2023/09/28 23:59:59Z"
echo "You said $D1, I prefer $DTEMP"
$D1=$DTEMP

Error Out

The following example shows you how to return a non-zero exit code resulting in the process going into Error:

$N=1
echo "Exiting with value $N."
if ($N -gt 0)
{
  [Environment]::Exit($N);
}

echo "Not reached"

Rename Files

The following example shows how to rename all the files in a directory:

ls | foreach {ren $_.fullname $_.name.replace("BI1", "BI2")}

Display Bittiness

if ([System.IntPtr]::Size -eq 4) { "32-bit" } else { "64-bit" }

Arrays

The following example shows how to use arrays in PowerShell; the process definition has two Out parameters, myArray and myArrayLength, the first will be filled with values as specified in the source, the second will contain the number of elements in the array. Note that numbers are formatted according to your locale; with a German locale, for example, the array will be displayed as 10,Hello,3,54321,World, note the decimal mark is a, in German locales. In this example, the myArrayLength parameter is correctly filled with 4.

$myArray = @(10,"Hello",3.54321,"World")

foreach ($i in $myArray) {
 write-host $myArray[$i]
}

Populating an array parameter (Out, or In/Out parameter) from Powershell; notice the comma to indicate to append to existing array.


$MyOutArray = $MyOutArray
$myArray = @(10,"Hello",3.54321,"World")
foreach ($i in $myArray) {
  $MyOutArray = $MyOutArray + ,$myArray[$i]
}

Taking a Screenshot of an Application

The following example requires a Run As User field prefix of {session} followed by a user/credential. A session must be open on the target host (where the platform agent runs) for that user.

$app = Start-Process notepad -ArgumentList /redwood/Books.rtx -passthru
#Sleep some to ensure notepad has time to open
start-sleep -m 500
jtool screenshot -p $app.Id
$app.CloseMainWindow()
$app.Close()

See Also

← Using the Python Definition TypeUsing the Visual Basic Script Definition Type →